posted on 2008-09-15, 15:45authored byA. Haidar, John C. Fothergill, Len A. Dissado, P. Hopewell
A technique is described for making dielectric spectroscopy measurements of very small quantities (<1μl) of oil. The technique utilises surface tension to hold the oil between the plates of a capacitor, the inter-electrode distance being controlled by a micrometer. Breakdown strength can also be estimated using this technique. Three samples of silicone oil,
used in cable sealing ends, were tested: virgin, used and failed. A major component in the frequency dependent impedance had the form Z(ω)=B(1-b)(iω)/sup.1-p/). This component was interpreted in terms of a fractal percolation model, and the anomalous thickness dependence predicted by the model verified by varying the inter-electrode distance. The difference observed for the three different samples indicate that conducting contaminants are responsible
for the percolation system.
History
Citation
IEEE Transactions on Dielectrics and Electrical Insulation, 2003, 10 (2), pp. 336-342.
Published in
IEEE Transactions on Dielectrics and Electrical Insulation
Publisher
Institute of Electrical and Electronics Engineers (IEEE)