University of Leicester
Browse
- No file added yet -

Effect of Damage on the Corrosion Performance of Thermal Spray Aluminium (TSA) Coating in Synthetic Seawater

Download (4.58 MB)
journal contribution
posted on 2023-09-22, 13:07 authored by Shiladitya Paul
A widely used coating system for corrosion mitigation of offshore steel structures is thermally sprayed aluminium (TSA). Even though these coatings have been used for decades, it is not always clear how they perform in service over long periods, particularly if damaged during installation or in service. To understand the corrosion behaviour of damaged TSA coatings in seawater and their tolerance to levels of damage, TSA coatings (1050 Al) were prepared on carbon steel substrates using wire arc spray and tested in synthetic seawater. Prior to testing, various levels of holidays or damage (~5%, 10%, 15% and 18%) reaching the steel substrate were drilled on the front surface of the coated specimens. Open circuit potential was measured and linear polarization resistance technique was used to calculate the corrosion rate. The work showed that the TSA coatings polarised steel to potentials below −800 mV (Ag/AgCl) at 25 °C, even in the presence of damage or holiday (up to ~18%). The SEM/EDX and XRD data confirmed the presence of brucite and aragonite in the damage region. The presence of damage impacted the short-term corrosion rate at the start, but did not significantly affect the overall corrosion performance of the TSA coatings in 420 days of testing.

Funding

TWI’s Industrial Members via the Core Research Programme(CRP)

History

Author affiliation

Materials Innovation Centre, School of Engineering, University of Leicester

Version

  • VoR (Version of Record)

Published in

Applied Sciences

Volume

13

Issue

2

Pagination

1109

Publisher

MDPI AG

eissn

2076-3417

Copyright date

2023

Available date

2023-09-22

Language

en