posted on 2015-12-18, 12:16authored byR. Thalman, M. T. Baeza-Romero, S. M. Ball, E. Borras, M. J. S. Daniels, I. C. A. Goodall, S. B. Henry, T. Karl, F. N. Keutsch, S. Kim, J. Mak, P. S. Monks, A. Munoz, J. Orlando, S. Peppe, A. R. Rickard, M. Rodenas, P. Sanchez, R. Seco, L. Su, G. Tyndall, M. Vazquez, T. Vera, E. Waxman, R. Volkamer
The α-dicarbonyl compounds glyoxal (CHOCHO) and methyl glyoxal (CH[Subscript: 3]C(O)CHO) are produced in the atmosphere by the oxidation of hydrocarbons and emitted directly from pyrogenic sources. Measurements of ambient concentrations inform about the rate of hydrocarbon oxidation, oxidative capacity, and secondary organic aerosol (SOA) formation. We present results from a comprehensive instrument comparison effort at two simulation chamber facilities in the US and Europe that included nine instruments, and seven different measurement techniques: broadband cavity enhanced absorption spectroscopy (BBCEAS), cavity-enhanced differential optical absorption spectroscopy (CE-DOAS), white-cell DOAS, Fourier transform infrared spectroscopy (FTIR, two separate instruments), laser-induced phosphorescence (LIP), solid-phase micro extraction (SPME), and proton transfer reaction mass spectrometry (PTR-ToF-MS, two separate instruments; for methyl glyoxal only because no significant response was observed for glyoxal). Experiments at the National Center for Atmospheric Research (NCAR) compare three independent sources of calibration as a function of temperature (293–330 K). Calibrations from absorption cross-section spectra at UV-visible and IR wavelengths are found to agree within 2% for glyoxal, and 4% for methyl glyoxal at all temperatures; further calibrations based on ion–molecule rate constant calculations agreed within 5% for methyl glyoxal at all temperatures. At the European Photoreactor (EUPHORE) all measurements are calibrated from the same UV-visible spectra (either directly or indirectly), thus minimizing potential systematic bias. We find excellent linearity under idealized conditions (pure glyoxal or methyl glyoxal, R[Superscript: 2] > 0.96), and in complex gas mixtures characteristic of dry photochemical smog systems (o-xylene/NO[Subscript: x] and isoprene/NOx, R[Superscript: 2] > 0.95; R2 ∼ 0.65 for offline SPME measurements of methyl glyoxal). The correlations are more variable in humid ambient air mixtures (RH > 45%) for methyl glyoxal (0.58 < R[Superscript: 2] < 0.68) than for glyoxal (0.79 < R[Superscript: 2] < 0.99). The intercepts of correlations were insignificant for the most part (below the instruments' experimentally determined detection limits); slopes further varied by less than 5% for instruments that could also simultaneously measure NO[Subscript: 2]. For glyoxal and methyl glyoxal the slopes varied by less than 12 and 17% (both 3-σ) between direct absorption techniques (i.e., calibration from knowledge of the absorption cross section). We find a larger variability among in situ techniques that employ external calibration sources (75–90%, 3-σ), and/or techniques that employ offline analysis. Our intercomparison reveals existing differences in reports about precision and detection limits in the literature, and enables comparison on a common basis by observing a common air mass. Finally, we evaluate the influence of interfering species (e.g., NO[Subscript: 2], O[Subscript: 3] and H[Subscript: 2]O) of relevance in field and laboratory applications. Techniques now exist to conduct fast and accurate measurements of glyoxal at ambient concentrations, and methyl glyoxal under simulated conditions. However, techniques to measure methyl glyoxal at ambient concentrations remain a challenge, and would be desirable.
History
Citation
Atmospheric Measurements Techniques, 2015, 8 (4), pp. 1835-1862 (28)
Author affiliation
/Organisation/COLLEGE OF SCIENCE AND ENGINEERING/Department of Chemistry
Version
VoR (Version of Record)
Published in
Atmospheric Measurements Techniques
Publisher
Copernicus Publications on behalf of the European Geosciences Union